With market products
Cameras, optics, lights and mechanics that are easy to find and replace, with our software.
How we work.
We work with small, medium and large companies. We start from the requirements and go, where it makes sense, all the way to production.
With an ad hoc solution
When the part or the line requires it, we design a specific solution on the same software base.
From listening to maintenance.
You can start from whichever phase you need.
01
Ascolto e requisiti
What it is for
Understand together what needs checking, why, and what happens today when a defect gets through.
Every project starts here. Before talking about cameras and models we need to know which problem you want to solve and how much it weighs.
What we do
- Meeting with production and quality, on site or remote
- Collection of good and defective samples
- List of defects in order of importance
- Line constraints, cycle times, space, existing systems
What you get
A shared requirements document, written so that people outside machine vision can follow it too.
02
Analisi e visione d'insieme
What it is for
Find out whether the defects you care about are actually visible, and which approach makes sense.
Not every defect shows up in an image, and automation does not always pay off. We say so up front, not afterwards.
What we do
- Acquisition trials on your samples with different optics and lighting
- Comparison of market products, Lumaspect Inspect™ included, against a custom solution
- First estimate of what can be automated and what stays with the operator
- Notes on regulation and traceability
What you get
A high-level view of the solution, with open points and risks stated plainly.
03
Proposta e prototipo
What it is for
See a concrete solution working on your parts before deciding whether to invest.
The prototype uses the same software base as Lumaspect Inspect™; we adapt acquisition and models to your case.
What we do
- [object Object]
- Prototype bench with market components and 3D-printed parts, or a Lumaspect Inspect™ configuration
- Models trained on your samples
- Measurements of missed defects, false alarms and timings
What you get
A working prototype and the numbers needed to decide whether to go on.
04
Pilota
What it is for
Try the solution on your line, with your operators, before rolling it out.
The pilot has a defined scope and metrics agreed before it starts.
What we do
- Installation on one line or workstation
- Training for operators and quality staff
- Comparison with your current inspection method
- Adjustments to acquisition, thresholds and models
What you get
A result measured under real working conditions.
05
Messa in produzione
What it is for
Move from pilot to a system that works every day and is compliant.
Data and models stay yours; servers can sit in your plant or on infrastructure you choose.
What we do
- Final configuration of machines or benches
- Connection to MES, ERP and traceability by serial number
- Technical documentation for CE marking, the AI Act and the Cyber Resilience Act
- Operating procedures for the people who use and maintain the system
What you get
A system in operation, documented, that your team knows how to use.
06
Mantenimento
What it is for
Keep the system working when products, suppliers and batches change.
An inspection system needs looking after once it is installed.
What we do
- Programming of new products and variants
- Model updates on data collected on the line
- Periodic review of the metrics
- Support and security updates
What you get
A system looked after over time, with metrics reviewed at regular intervals.